---
title: SSH Key Configurations for GCP Devices
slug: singleconnect-reference-guide-3-3-0/ssh-key-configurations-for-gcp-devices
description: This document offers a comprehensive guide on using SSH keys to establish secure connections with GCP devices. It emphasizes the importance of noting down the SSH key name in device properties, specifically for integration with the SAPM module. Enabling S
docTags: 
createdAt: 2022-08-01T20:49:10.000Z
---

If the devices imported from GCP have the required configuration to log in with an SSH key, Single Connect can provide seamless connection to the device. Otherwise, the global username and password need to be defined for each device group.
To use an SSH key for GCP devices:


Get the SSH key name is stored in the device properties of each device:

1. Navigate to **Device Management **>** Device Inventory**.
2. Right-click an** Azure Device**, and select **Show Properties** (The device’s SSH Key name is stored in the **sshKeyName** property)
3. Write down the value of this property to be used for the **SAPM** module.

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/Clp9ETDdESIf8g0oBVW3F_image.png "SSH Key Name")

Enable SSH Key Connection to Device Groups:

1. Navigate to** Device Management **> **Device Groups**.
2. Right-click the Device Group the GCP devices are imported to, and select **Show Properties**.
3. Select the **addDeviceSshKeyToUserSelection **property and set the value as **true**.

Upload SSH key to Single Connect and enable connection to the device:

1. Navigate to **SAPM **> **SAPM Accounts.**
2. Fill in the required fields (The **Name** field must be exactly equal to the value of **sshKeyName** in the Device Property.)
3. Select **SSH Key** in the Type field.
4. Copy the contents of the SSH key into the Secret Data field.

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/hF4F-YBOredQ7pDGGDW_S_image.png "SSH Key in the SAP")

:::hint{type="info"}
The SSH keys must be in the OpenSSH key format. This means that the value put into the Secret Data field should:
start with the “---- BEGIN SSH2 PUBLIC KEY ----” and
end with the “---- END SSH2 PUBLIC KEY ----” indicators.
:::