--- title: SNMP Configuration slug: singleconnect-reference-guide-3-3-0/snmp-configuration description: This document outlines guidelines for configuring parameters in the System Configurations section, including target IP and port for SNMP trap sending, preferred community string, and enabling SNMP trap. Default values are included for each parameter. A he docTags: createdAt: 2022-08-02T17:44:05.000Z --- The following parameters should be set in the System Configurations section: | **Parameter Name** | **Parameter Value** | | -------------------------------- | ------------------------------------------------------------------------------------------------------------- | | **snmp.target.ip** | Target IP to send the SNMP trap to. If not defined, “localhost” is used as the default target IP. | | **snmp.target.port** | Target port of the target IP to send the SNMP trap to. If not defined, “162” is used as the default port. | | **snmp.community.string** | The preferred community string should be defined. If not defined, “public” is used
as the default value. | | **monitoring.snmp.trap.enabled** | The flag that needs to be set to “true” to enable sending SNMP traps. Its default value is “false”. | ![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/Wk-fYQIM9MGqshfatW8uH_image.png "SNMP Configuration Parameters in the System Config Man.")