SAPM Accounts Bulk Import
You can add SAPM Accounts in bulk to Single Connect by following the steps below:
- Navigate to SAPM Management > Bulk Import screen.
- Click Download Template. An Excel file named SAPMAccountBulkImportTemplate is downloaded.
![Uploading Bulk Import File Uploading Bulk Import File](https://images.archbee.com/g9cApVza9NIhSh0pjZYtA/LYvVTCpw5GQvvNTfaTZOo_image.png?format=webp)
- Open the template file and enter SAPM account information as described in the column descriptions. Save the template file on your computer.
- On the Bulk Import screen, click Browse and select the template file you saved.
- Click Upload File to add the SAPM accounts list to the Parse Results section on the Bulk Import screen.
- Click Import SAPM Accounts.
You added the SAPM accounts. However, the passwords will change next time the SAPM Password Change job runs again.
![Bulk Import result screen Bulk Import result screen](https://images.archbee.com/g9cApVza9NIhSh0pjZYtA/ALNP886DJ8KGdbFCQDR6Z_image.png?format=webp)
SAMP Account Bulk Import Template Column Descriptions
Column | Required/Optional | Description |
---|---|---|
No | Required | No refers to the row number. Enter each account in a separate row. |
Secret Type | Required | Secret Type indicates whether the account is Static or Dynamic. Select Dynamic or Static from the combo box. Password rotation occurs for Dynamic accounts. |
IP Adress/Hostname | Optional | Enter the IP Address / Hostname where the account exists. Not mandatory if the Static Strategy is selected. You must select the IP address of a device that is already defined in the application. |
Secret Name | Required | All accounts to be managed must have a name. Enter a name; this name will appear in the application. |
SAPM Group | Optional | Enter a group for the account to be managed through the specified group. The account does not have to be in the specified group. |
SAPM Configuration | Required | Select SAPM configuration from the pre-defined values. SAPM Configuration combo box will also list the user-defined configurations. |
SAPM Account Username | Required | Enter SAPM account user name. It is important to write the username on the device correctly if you didn’t select a configuration with Static Strategy in the SAPM Configuration field. |
SAPM Account Password | Required | Enter SAPM account password. |
Change Period (day) | Required | Enter password change frequency in days. |
Permissions | Optional | Enter the Permissions field as follows: {UserGroupA=FULL_CONTROL,UserGroupB=READ_ONLY} |
Passphrase | Optional | Enter the SSH passphrase if SSH Key Configuration is selected in the SAPM Configuration. |
Private Type | Required | Private accounts cannot be seen by other users in the same user group. Select Yes to set the SAPM account private. |
Owner | Required | Enter the owner’s username. Each account has one user ownership. Owners should be selected from existing users. |
Description | Optional | Enter SAPM account description. |