--- title: SNMP Configuration slug: singleconnect-reference-guide-3-2-0/snmp-configuration description: Learn how to properly configure your system by setting parameters such as target IP, port for SNMP traps, preferred community string, and enabling SNMP trap sending. Our document includes an informative image of the SNMP configuration parameters in the Sy docTags: createdAt: 2022-08-02T17:44:05.000Z --- The following parameters should be set in the System Configurations section: | **Parameter Name** | **Parameter Value** | | -------------------------------- | ------------------------------------------------------------------------------------------------------------- | | **snmp.target.ip** | Target IP to send the SNMP trap to. If not defined, “localhost” is used as the default target IP. | | **snmp.target.port** | Target port of the target IP to send the SNMP trap to. If not defined, “162” is used as the default port. | | **snmp.community.string** | The preferred community string should be defined. If not defined, “public” is used
as the default value. | | **monitoring.snmp.trap.enabled** | The flag that needs to be set to “true” to enable sending SNMP traps. Its default value is “false”. | ![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/Wk-fYQIM9MGqshfatW8uH_image.png "SNMP Configuration Parameters in the System Config Man.")