---
title: System Configuration Parameters
slug: singleconnect-reference-guide-3-1-0/system-configuration-parameters
description: Learn how to configure the Tenant-based System Configuration Parameters with this helpful guide. Follow the step-by-step instructions to adjust the necessary parameters in the Web GUI. Refer to Appendix 1 for a comprehensive list of parameters. If the 'RE
docTags: 
createdAt: 2022-08-02T21:12:14.000Z
---

The Tenant based System Configuration Parameters are configured in the Web GUI:

1.
   Navigate to **Administration** >** System Config Man**.
2. Set the required parameters.

The **System Configuration Parameters** are outlined in **Appendix 1**, at the end of this document. 

:::hint{type="info"}
If **RESTART REQUIRED **is defined as **YES**, the netright-tomcat service has to be restarted after parameter configuration. To restart the system, establish an SSH connection to Single Connect and run the command: 
systemctl restart pam-gui.
:::