---
title: System Configuration Parameters
slug: singleconnect-reference-guide-3-1-0/pPHH-system-configuration-parameters
description: Discover how to locate and customize System Configuration Parameters in the Web GUI with this helpful document. Learn step-by-step instructions to access the System Config Manager and adjust the necessary parameters. Find out what to do if the "RESTART RE
docTags: 
createdAt: 2022-07-22T10:15:35.000Z
---

The System Configuration Parameters are configured in the Web GUI:

1. Navigate to **Administration** >** System Config Man**.
2. Set the required parameter, as explained below.

The **System Configuration Parameters** can be found in [](https://app.archbee.com/docs/jsymInd0w_SXayMlKGOmR/1PFlQwOd92rKTEXXUh73R)[APPENDIX 1: System Config Manager Parameters](docId\:bsmJRSdJSQeX4cGEVHAus) at the end of this document.

:::hint{type="info"}
If the **RESTART REQUIRED **parameter is defined as **YES**, the Netright-tomcat service has to be restarted after configuring the parameters below. To restart the system, establish an SSH connection to Single Connect and run the command **systemctl restart pam-gui**.
:::