---
title: System Configuration Parameters
slug: reference-guide-3-0-0/DGQu-system-configuration-parameters
description: Learn how to configure System Configuration Parameters in the Web GUI with this helpful document. Find step-by-step instructions on setting the required parameters using the System Config Manager. Discover a link to the System Config Manager Parameters at
docTags: 
createdAt: 2022-07-22T10:15:35.000Z
---

The System Configuration Parameters are configured in the Web GUI:

1. Navigate to **Administration** >** System Config Man**.
2. Set the required parameter, as explained below.

The **System Configuration Parameters** can be found in [APPENDIX 1: System Config Manager Parameters](docId\:JMb-_26BhRg4aoK4haeLC) at the end of this document.

:::hint{type="info"}
If the **RESTART REQUIRED **parameter is defined as **YES**, the Netright-tomcat service has to be restarted after configuring the parameters below. To restart the system, establish an SSH connection to Single Connect and run the command **systemctl restart netright-tomcat**.
:::