---
title: Containerization of Web Browser
slug: kronpam-reference-guide-legacy-ui-3-4-0/containerization-of-web-browser
description: Learn how to configure containerization for recording videos of HTTP sessions with this comprehensive document. Discover the specific method required to initiate the HTTP session and the necessary licenses to enable the containerization feature. Follow st
docTags: 
createdAt: 2023-04-26T08:02:35.000Z
---

In order to be able to record videos of the HTTP sessions, the HTTP session must be initiated with a different method than the one outlined previously. To enable the containerization feature, the corresponding licenses are required. In this section, we only address the required configurations. More details about the containerization feature can be found in our user manual  How to Reach HTTP Devices Through Containers.

From the 3.3.1 release on, the initial manual operation to set up containers will no longer be needed. Thus, the steps outlined in the How to Reach HTTP Devices Through Containers\_release 3.3.1 document should be followed.

Before continuing the configuration, the base image can be installed by the support team or can be downloaded via the following command on the PAM instance CLI:

`docker pull krontechnology/containerization:331`

Then its name should be changed with the following command:

`$ docker image tag krontechnology/containerization:<relevant current tag> http-proxy-image`

To check that the operation was successfully executed use the command:

`$ docker image ls`


To set the resources for the containers to be created:

1. Navigate to **Administration > System Config Man**.
2. Set the **resources.of.containers** parameter with one of these values: **local, remote,&#x20;**&#x6F;&#x72;**&#x20;all.**
   These values define which kind of resources will be used by the container manager.

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/VPKC-7BVQyumAH9X46VUa_image.png "Selecting Host/s for Containers")

To define which user(/s) should reach HTTP devices through containers:

1. Navigate to **User Accounts > User Group Definition > User Group Properties.**
2. Set the **accessOverContainer** property key as true.

::Image[]{src="https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/5tQ5Y2RUfyqwogUxYqRMK_image.png" size="72" width="642" height="631" caption="User Group Properties" position="center" showCaption="true"}

::Image[]{src="https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/Og1s_5FOVO97uk54Le2Xk_image.png" size="72" width="871" height="190" caption="Property Key" position="center" showCaption="true"}

To specify which HTTP device access to use containerization:

1. Navigate t&#x6F;**&#x20;Device Inventory > Device Properties.**
2. Set the **accessOverContainer&#x20;**&#x76;alue as **true.**

::Image[]{src="https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/q_0iCW_4xYGZ3Fnp7aWme_image.png" size="72" width="531" height="307" caption="Device Properties" position="center" showCaption="true"}

::Image[]{src="https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/l3nEH0iogvQoba6m1PKT4_image.png" size="72" width="575" height="130" caption="Property Key" position="center" showCaption="true"}

After saving this setting couple, some of the additional properties will be loaded automatically. Those automatically set Property Keys can be found on the screen below.

::Image[]{src="https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/YQOkYt6_MBQXBA6ToRwmj_image.png" size="72" width="633" height="419" caption="Automatically Loaded Attributes" position="center" showCaption="true"}

From now on, that HTTP device can be reached only from the PAM Management UI and Desktop Client App by the defined individual accounts.

::Image[]{src="https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/F1crdV3fG4weNELBfqr2y_image.png" size="72" width="594" height="478" caption="Access Over Container" position="center" showCaption="true"}

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/KUi2MZiVTK1YDgEEU5dOa_image.png "HTTP Proxy Authentication Page")