---
title: System Configuration Parameters
slug: kronpam-reference-guide-3-9-0/system-configuration-parameters
description: Learn how to configure System Configuration Parameters using the Web GUI. Find the necessary parameters in the Appendix 1 of the document "System Config Manager Parameters". If "RESTART REQUIRED" is set to "YES", restart the Netright-tomcat service by est
docTags: 
createdAt: 2022-07-22T10:15:35.000Z
---

The System Configuration Parameters can be managed from the Web GUI:

1. Navigate to **Administration** >** System Config Man**.
2. Set the required parameter, as explained below.

The **System Configuration Parameters** can be found at the end of this reference guide.

:::hint{type="info"}
If a configuration requires a pam-gui service restart in order to take effect, establish an SSH connection to Kron PAM server and run the command **systemctl restart pam-gui** (using **sudo **may be necessary depending on the user connected to the server).
:::