---
title: System Configuration Parameters
slug: kronpam-reference-guide-3-6-0/MgS0-system-configuration-parameters
description: Learn how to configure System Configuration Parameters using the Web GUI. Find the necessary parameters in the Appendix 1 of the document "System Config Manager Parameters". If "RESTART REQUIRED" is set to "YES", restart the Netright-tomcat service by est
docTags: 
createdAt: 2022-07-22T10:15:35.000Z
---

The System Configuration Parameters are configured in the Web GUI:

1. Navigate to **Administration** >** System Config Man**.
2. Set the required parameter, as explained below.

The **System Configuration Parameters** can be found in at the end of this document.

:::hint{type="info"}
If the **RESTART REQUIRED **parameter is defined as **YES**, the pam-gui service must be restarted after configuring the parameters below. To restart the system, establish an SSH connection to Kron PAM and run the command **systemctl restart pam-gui**.
:::