---
title: SNMP Configuration
slug: kronpam-reference-guide-3-5-0/snmp-configuration
description: This document provides a comprehensive guide for configuring SNMP parameters in the System Configurations section. Learn how to set target IP and port, select the preferred community string, enable SNMP traps, and access a visual representation of SNMP Co
docTags: 
createdAt: 2022-08-02T17:44:05.000Z
---

The following parameters should be set in the System Configurations section:

| **Parameter Name**               | **Parameter Value**                                                                                           |
| -------------------------------- | ------------------------------------------------------------------------------------------------------------- |
| **snmp.target.ip**               | Target IP to send the SNMP trap to. If not defined, “localhost” is used as the default target IP.             |
| **snmp.target.port**             | Target port of the target IP to send the SNMP trap to. If not defined, “162” is used as the default port.     |
| **snmp.community.string**        | The preferred community string should be defined. If not defined, “public” is used<br />as the default value. |
| **monitoring.snmp.trap.enabled** | The flag needs to be set to “true” to enable sending SNMP traps. Its default value is “false”.                |

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/u9q-0yl0XFu-yuquUAfg-_image.png "SNMP Configuration Parameters in the System Config Man.")