---
title: Kron PAM Server Configuration
slug: kronpam-legacy-ui-reference-guide-3-5-0/kron-pam-server-configuration
description: Learn how to configure network settings on Kron PAM with this step-by-step guide. Connect as root user using SSH, update the hosts file, configure the DNS, restart the network service, update NTP servers, enable and restart the chronyd service, and set sy
docTags: 
createdAt: 2022-08-01T11:52:07.000Z
---

1. Establish an SSH connection to Kron PAM as the root user.
2. Open the **/etc/hosts** file using the command:
   vi/etc/hosts
3. Add the following line to the top of the list:
   IP\_Address hostname.domain hostname

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/36XvB27pgXWA9XwdknjDW_image.png "Hostname/Domain")

1. Open the **/etc/sysconfig/network-scripts/ifcfg-ens192** file with the command:
   vi /etc/sysconfig/network-scripts/ifcfg-ens192
   Make sure that Primary DNS (DNS1) is the Active Directory host IP in that file. The interface name (ens192) may be different on your system, please check the correct interface configuration file accordingly.
2. Restart the network service with the command:
   systemctl restart network
3. The NTP servers should be changed. Open the chronyd config file with the command:
   vi /etc/chrony.conf
4. Edit the configurations in the config file according to the information below:
   server time.google.com iburst
   server time2.google.com iburst
   server time3.google.com iburst
   server time4.google.com iburst

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/g6f_gI54iAZDsN20t34mC_image.png "NTP Config")

-
  Execute the commands:
  systemctl enable chronyd && systemctl restart chronyd
  timedatectl set-ntp true