---
title: RPAM Installation – Scenario Without RPAM Connector (On-PAM)
slug: kron-pam-installation-guides-v3/rpam-installation-scenario-without-rpam-connector-on-pam
createdAt: 2026-11-20T10:29:35.367Z
---

In case the **RPAM Connector** will not be used, the RPAM MTC Installer is executed on the **Kron PAM Server** with the **On-PAM** role in order to establish the WireGuard-based secure tunnel directly towards the **RPAM Portal** machine.

By following the steps introduced in this section, Kron PAM Remote Privileged Access Management is deployed with a secure WireGuard VPN tunnel between the **RPAM Portal** and the **Kron PAM Server**.

:::Heading{depth="2" indent="1"}
Kron PAM Server Configuration
:::

Apply the same Kron PAM Server configuration (CORS, System Config parameters, and portal functions) explained in [Kron PAM Server Configuration](https://docs.krontech.com/kron-pam-installation-guides-v3/kron-pam-server-configuration).

:::Heading{depth="2" indent="1"}
RPAM Portal Installation
:::

Install the RPAM Portal as explained in Section 6.3, selecting **No failover**. In this scenario, the RPAM Connector fields of the RPAM Portal parameters refer to the **Kron PAM Server**:

·         **RPAM Connector's WireGuard IP:** the WireGuard tunnel address of the Kron PAM Server (e.g., 10.0.0.2).

·         **RPAM Connector's real/management IP (optional):** the real IP address of the Kron PAM Server.

:::Heading{depth="2" indent="1"}
On-PAM Installation
:::

Start the RPAM MTC Installer on the Kron PAM Server (Section 4.2), complete the common steps (Section 5), and select **On-PAM** as the configuration type.

### Parameters

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/oMMlXF6sziWlZFARcZRrG_image.png "The On-PAM Parameters")

| **Field**                                       | **Description**                                                        |
| ----------------------------------------------- | ---------------------------------------------------------------------- |
| **Kron PAM's WireGuard IP address**             | The WireGuard tunnel address of this Kron PAM Server (e.g., 10.0.0.2). |
| **RPAM Portal WireGuard VPN Server IP**         | The real/reachable IP address of the RPAM Portal.                      |
| **WireGuard VPN port**                          | The common UDP port.                                                   |
| **RPAM Portal's WireGuard IP**                  | The WireGuard tunnel address of the RPAM Portal (e.g., 10.0.0.1).      |
| **RPAM Portal WireGuard public key (optional)** | If left empty, it is fetched automatically.                            |

:::hint{type="info"}
No package installation is performed for the On-PAM role; **wireguard-tools** is assumed to be already installed on the Kron PAM Server.
:::

:::hint{type="warning"}
The On-PAM installation changes the system settings of the **Kron PAM Server**: SELinux is set to **permissive**, **IP forwarding** is enabled, and the **firewalld service is stopped and masked**. Make sure this is acceptable for the Kron PAM Server before starting the On-PAM installation.
:::

The Review, Confirm, progress, and result screens are the same as in [RPAM Connector Installation](https://docs.krontech.com/kron-pam-installation-guides-v3/rpam-connector-installation) . Enter the public key shown on the result screen on the RPAM Portal side (or on the **/peer-key** page of the RPAM Portal, see below).

### Verification

| **Linux CLI** | **\[root\@pam\~]#** command -v wg<br />**\[root\@pam\~]#** systemctl status wg-quick\@wg-client.service<br />**\[root\@pam\~]#** wg show |
| ------------- | ---------------------------------------------------------------------------------------------------------------------------------------- |

:::Heading{depth="2" indent="1"}
Completing the Peer Key Exchange on the Kron PAM Server
:::

If the On-PAM installation was done before the RPAM Portal installation, the WireGuard configuration of the Kron PAM Server still contains a placeholder instead of the public key of the RPAM Portal. After the RPAM Portal installation is completed, open the RPAM MTC Installer on the Kron PAM Server (**http\://\{Kron PAM Server IP}:8443**), press **Update peer key**, enter the real/management IP address of the RPAM Portal (or paste its public key), and press **Update**, as explained in [Completing the Peer Key Exchange on the RPAM Connector](https://docs.krontech.com/kron-pam-installation-guides-v3/completing-the-peer-key-exchange-on-the-rpam-connector).

**Check:** The **latest handshake** field in the **wg show** output should be filled in on both the Kron PAM Server and the RPAM Portal.

| **Linux CLI** | **\[root\@pam\~]#** wg show<br />**\[root\@pam\~]#** ping \{RPAM Portal's WireGuard IP}<br />**\[root\@portal\~]#** wg show |
| ------------- | --------------------------------------------------------------------------------------------------------------------------- |

