---
title: RPAM Installation – Scenario With RPAM Connector
slug: kron-pam-installation-guides-v3/rpam-installation-scenario-with-rpam-connector
createdAt: 2026-11-20T10:29:22.543Z
---

By following the steps introduced in this section, Kron PAM Remote Privileged Access Management is deployed with a secure WireGuard VPN tunnel between the **RPAM Portal** and the **RPAM Connector** machines.

The RPAM MTC Installer is executed separately on both machines: once with the **RPAM Connector** role (on premise) and once with the **RPAM Portal** role (on the cloud). The recommended order is as follows:

1.    Configure the Kron PAM Server (Section 6.1).

2.    Install the **RPAM Connector** (Section 6.2). Since the RPAM Portal is not installed yet, leave the **RPAM Portal WireGuard public key** field empty; a placeholder is written to the WireGuard configuration and a warning is shown at the end of the installation. This is expected.

3.    Install the **RPAM Portal** (Section 6.3). Enter the real/management IP address of the RPAM Connector so that the public key of the RPAM Connector is fetched automatically (or paste the key shown at the end of the RPAM Connector installation).

4.    **Return to the RPAM Connector** and set the public key of the RPAM Portal on its **/peer-key** page (Section 6.4). Without this step, the WireGuard tunnel does not come up.
