---
title: MTC Outbound
slug: kron-pam-installation-guides-v3/mtc-outbound
createdAt: 2026-11-20T15:04:36.660Z
---

1.    Select **MTC Outbound** as the MTC Role. No additional parameter is required for this role; the installation automatically installs the packages and JDK 20, provisions the common files of the connector (heartbeat, restricted CLI, pam-connector.service), creates the **pamuser** OS user with its sudoers rule and a dedicated SSH key pair, enables IP forwarding, and stops and masks the firewalld service.

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/4Rj6WkEPpFczec85Q9ogA_image.png "Selecting the MTC Outbound role")

2.    Check the summary on the Review screen and press **Confirm**.

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/kuixxNHvZpWQ9gOVB6BHx_image.png "The Review screen of the MTC Outbound installation")

3.    When the installation is completed, an **SSH key** box is shown. Copy this private key by using the **Copy** button. Kron PAM uses this key to connect to the Multi Tenant Connector as **pamuser** over SSH and to complete the configuration remotely. The same key can be copied again later from the "This host is already configured" page of the installer.

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/mBJUdwZlR4n8u6Jq1CUVV_image.png "The SSH key shown at the end of the MTC Outbound installation")

4.    Go to the **Tenant Connector** page on the Web GUI of the real Kron PAM Server and add an outbound connector node. Paste the copied private key into the **SSH Key** field, fill in the other required data (**Site Name**, **Node Name**, **Tunnel Port**, **Connection Port**, **External IP**, etc.), and press **SAVE**. From this point on, the WireGuard tunnel and the pam-connector.service configuration are completed remotely by Kron PAM.

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/jQHbFyVCUodHYBZfcNXe8_image.png "Multi Tenant Connector Outbound Configuration on the Kron PAM Web GUI")

:::hint{type="info"}
You can find the logs related to the installation steps handled by the Kron PAM Server in the **connector.log** file under **/pam/gui/logs**. In case you see the **Success** message at the end of the log file, the installation is successfully completed.
:::

**Check:** Run the following commands on the Multi Tenant Connector:

| **Linux CLI** | **\[root\@connector\~]#** systemctl status pam-connector.service<br />**\[root\@connector\~]#** tail -f /opt/pam/connector/logs/log.txt |
| ------------- | --------------------------------------------------------------------------------------------------------------------------------------- |

On the **Tenant Connector** page of the Kron PAM Web GUI, check that the heartbeat is received regularly and the node status is **Active**.

![](https://api.archbee.com/api/optimize/g9cApVza9NIhSh0pjZYtA/wcI4dEZAeJ9MFCDXwEi0Z_image.png "The MTC Outbound node on the Tenant Connector page of the Kron PAM Web GUI")

